[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: still film through TK



	Martin writes...
>  
	 > If you shoot with a still camera, the most painless process
requires a few
	 > simple steps/rules:
	...
	<snip> 

	I contend that the most painless procedure involves finding an Ursa
with Metaspeed and set it to 8-perf. (or find a Spirit with 8-perf software)

	Also, you may NOT want to rotate the still camera 90 degrees as
Martin suggests. You can get a little more than 6 out of the 8 perfs worth
of image in an unmodified 35mm gate on an Ursa. (more on a Spirit)

	Finally, if you cannot find an "8-perf" capable telecine, you could
transfer 4-perf at 29.97fps (for NTSC,anyway) and use a DDR running at 2X
speed (interpolation-off) to toss the "bad" frames, thus avoiding the use of
an Inferno (type) suite.

	Randy Reck
	RIOT



---
Thanks to Rich Torpey for support in 1999
No advertising/marketing allowed on the main TIG.  Contact rob at alegria.com
anonymous messaging now at http://www.alegria.com/HyperNews/get/ubique.html
1041 subscribers in 41 countries on Tue Jun 29 10:55:23 CDT 1999 
subscribe/unsubscribe with that Subject: to telecine-request at alegria.com
complete information on the TIG website http://www.alegria.com/tig3/