[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: clearview is cloudy




Joe you wrote to the TIG:

>The da Vinci protocol for Clearview was incorporated into DUI code before
>IBC and tested during the show. This version of code will be released to
>beta sites during the week of November 7.  Provided no serious problems are
>discovered during the beta testing process, the final release to all DUI
>users will occur within 2-3 weeks of that date.
>Clearview does not receive its control via the Ursa interface but has a
>separate RS422 port which connects to the Sizing connector on the
>Renaissance 888 frame.  It may be worth getting your engineering department
>to install this cable in advance.

Is it safe to assume that you will also provide control of DAV's ClearView
on Mk3 and Turbo2 machines that have DAV Scan Systems and ClearView
installed?
If so, when would this be integrated into the EdWin code?

Regards,

Mike Weaver (weav at skyview.com)
Skyview Film & Video
541 N. Fairbanks 22nd Floor
Chicago, IL 60611
ph:  312-670-1412
fax: 312-670-4520



---
thanks to Rich Zabel of Tekniche for support of the TIG in 1997
TIG subscriber count is 883 on Thu Oct 30 18:05:23 PST 1997
mailinglist digest available.... unsubscribe via a message to
'telecine-request at alegria.com' with Subject: unsubscribe



References: