[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

30KV supply replace, CRT sleep



--- Forwarded mail from Susann Walker <76734.1545 at CompuServe.COM>

Reply to David Marshall and Vince Forcier

Be aware X-ray emission may also occur through the side walls of the
glass bulb.  It is not advisable to run a tube at 30KV that was not
originally intended to run at this level.

Reply sent as typed from David Hurst, RCI

--- End of forwarded message from Susann Walker <76734.1545 at CompuServe.COM>


--- Forwarded mail from Susann Walker <76734.1545 at CompuServe.COM>

Reply to Shaley Brooks' question:

All URSA's when they were updated with V4.01software allow the CRT to
be switched off.  This facility is standard for URSA Gold.

To switch off the tube to put it into sleep, hit "EHT Off" and then
"CRT On" button.  Remember if you put the tube to sleep you need to
allow adequate time for the tube to warm up and stabilize before
using.

Reply sent as typed from David Hurst, RCI.

--- End of forwarded message from Susann Walker <76734.1545 at CompuServe.COM>