[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TIG] PAL xfr with NTSC DAT



Dave

Following on from Alain's suggestions,  you could also load your DAT into a hard
disk recorder if one is available.    Most hard disk recorders have a full range
of timecode options.    Load the DAT in direct digital and set the timecode on
the machine to the one which best suits your setup.

Jim Guthrie,
Sprockets & Bytes Ltd.,
Denham,
UK.

!^NavFont02F01170006MGHHH`37A4

  E-mail from: Jim Guthrie, 16-May-1996