[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE>Re: RE>Ursa Gold Shading Problem




It is still likely that both X and Y channels have not been set up proper=
ly. I've seen this many times before.=20
There isn't anything else that can cause this.
Hope they sort you out ok.
PS..replacing the scan amp also in not a  certain fix as the unit still n=
eeds setting up in the URSA for perfect results.

PG

--------------------------------------
Date: 17/11/95 7:29 am
To: Paul Grace
From: Grant Petty
>Date: Fri 17/11/95
>To : Grant Petty
>From:Paul Grace
>
>Hi,
>The problem lies in the scan output amplifier.
>There are two types, an early  type which is not adjustable and a later =
type
>which is.
>To adjust the scan amp you require access to the test jig at Rank Cintel=
.
>You need to contact their service dept to discuss this.
>It can be easily fixed and makes a huge difference.
>Please speak to Dave Green and see what he suggest's.
>Hope this helps
>
>PG
>
>--------------------------------------
>Date: 16/11/95 10:44 am
>To: Paul Grace
>From: Grant Petty
>Hi,
>
>This is the first time I have posted to this system so forgive me If I s=
crew
>up.
>
>We have an Ursa Gold, and the shading does not map to the tube face
>corectly. I have adjusted the shading timing (switchs on all three shadi=
ng
>boards) to try and get it to register (It's a Hor Position Problem) but =
the
>shading corection overlay (forgive the terms, its late) is wider that th=
e
>tube. I have autoalinged with film in the gate and I can adjust the timi=
ng
>so that the left of the image output is lined up but the right side is o=
ut.
>It is causing an vertical line on the tube where the diffrence in burn
>bettween 16mm and 35mm scan patches causes a diffrence in light level
>across the tube. The autoalignment is corecting for this diffrence but t=
he
>because of the mapping error the edge stands out.
>
>I thought someone might have seen this before and could help out.
>
>Thanks
>
>Grant Petty
>
>------------------------------------------------------------------------=
-
>Grant Petty
>
>http://people.interconnect.com.au/~grantp/
>
>12 Thistlethwaite Street
>South Melbourne
>Victoria
>Australia     3205
>
>Phone +61 (19) 190 918
>Fax +61 (3) 9699 3226
>------------------------------------------------------------------------=
-
>
>
>-----=20
>This list is available as a digest- questions to rob at xyzoom.alegria.com.=

>Buying/selling equipment/employment?  Telecine Classified webpage is up.=


------------------------------

Hi,

Thanks for your reply.

I swapped over the x and y amps and they are the same.=20
Rank are unshure of the problem.
I am going to send the some a tape so the get a better idea.

Thanks

Grant.

-------------------------------------------------------------------------=

Grant Petty

http://people.interconnect.com.au/~grantp/

12 Thistlethwaite Street
South Melbourne
Victoria
Australia     3205

Phone +61 (19) 190 918
Fax +61 (3) 9699 3226
-------------------------------------------------------------------------=