[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 8mm xfers




On Tue, 18 Jul 1995, Steve Darsey wrote:

> I need some setup tips for 8mm xfers. 
> We use a IIIB w/metaspeed and classic davinci. 
> The gate is on hold at Rank LA. Do I need guide rollers? Any other 
suggestions would be appreciciated.

Everything you need, including an extra shading board, will come with the 
kit from Rank.  8mm, or Super-8, is a breeze with Meta-Speed.  Just set 
up the 8mm gate on the gate page as you would normally set up any gate, 
and away you go.

-Ralph Edwards