[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

No Subject



 Reply to:     RE>>over the top or omega?
RL-
It was apparently due to slippage on the capstan, although the
capstan was in good shape and well cleaned, etc. The manifestation
was like buffing abrasion marks; concentrated in small areas. -BT

----------------------------
Date: 03-17-95 16:23
To: Topazio, Bill
From: Rob Lingelbach

On Mar 17,  8:26, "Bill Topazio" wrote:
} Subject: Re: over the top or omega?

> Because of the minimal film-capstan contact, there is always the
> danger of film damage if you shuttle in the half-wrap mode. Yeah, 
> we've been burned by that in the past.

Bill, could you elaborate a little on exactly how the film was damaged
by shuttling in half-wrap mode?  I'm curious if it was the capstan or
the exit roller, or something else.

--Rob

Subj:	Re: over the top or omega?
Date:	95-03-17 22:48:05 EST
From:	telecine at xyzoom.alegria.com
To:	telecine at xyzoom.alegria.com